Micro 1.5 Inch Spa and Step Light - Small 100mm Face
Micro 1.5 Inch Spa and Step Light - Small 100mm Face
✓ Free US shipping, delivery in 7 to 15 business days
✓ 2-year warranty against water intrusion and LED failure
✓ Fits or full refund. No restocking fee.
1.5-Inch Threaded RGB Pool & Spa Light
Upgrade a standard 1.5-inch threaded pool or spa fitting with a compact, full-color LED light designed for modern nicheless installations. The threaded body screws directly into a compatible female fitting, while the wide 100 mm face provides a clean finished appearance against the pool wall.
This sealed 12V AC light produces full RGB color effects plus a clean, bright white. Its compact 93 mm body makes it ideal for pools, spas, tanning ledges, steps, fountains, and other locations where a traditional full-size wet-niche light will not fit.
Installation is straightforward: remove the existing light, pull the cable through the conduit, and thread the new fixture into the existing 1.5-inch fitting. The pool usually does not need to be drained.
Compact Size. Full-Size Color.
The high-efficiency LED array spreads light across the entire face of the fixture, creating a smooth, vibrant glow without the harsh center hot spot commonly found on smaller pool lights.
Choose from individual colors, bright white, and animated RGB programs. When paired with our Smart WiFi Pool Light Transformer, the light can be controlled through the Tuya app, included handheld remote, compatible voice assistants, or directly from the transformer.
Built for Underwater Use
- Standard 1.5-inch threaded installation
- 100 mm face diameter
- Compact 93 mm overall depth
- Full RGB color and bright white
- Multiple color-changing programs
- Soft, evenly distributed illumination
- Sealed IP68 underwater construction
- Durable UV-resistant housing
- Energy-efficient 12V AC operation
- No replaceable bulb or lens gasket
Voltage and Controls
This light requires a 12V AC pool-light transformer. It must not be connected directly to 120V household power.
What to Check Before Ordering
This fixture is intended for a female 1.5-inch threaded pool or spa fitting. Measure the existing fitting and confirm that the conduit and cable path are clear. The 100 mm front face sits against the finished pool surface while the threaded body installs inside the fitting.
Not sure whether it will fit? Text photos of your existing light and fitting to (239) 350-3110, and we will review them before you order.
Warranty and Shipping
Covered by a 2-year warranty against water intrusion and LED failure.
Free US shipping. Please allow approximately 7 to 15 business days for delivery. If the light does not fit your confirmed application, return it for a full refund.
Free US shipping
Delivery in 7 to 15 business days
Fitment guarantee
Fits or we refund
2-year warranty
Water intrusion + LED failure
US-based support
Real humans, not chatbots
Compatible with these OE pool lights
Match your existing light's manufacturer and original part number with the lists below. If yours isn't here, send us a photo and we'll confirm.
Pentair
MicroBrite, GloBrite, IntelliBrite
Hayward
ColorLogic 4.0, ColorLogic 320, Universal ColorLogic
Jandy
WaterColors, HydroCool, Pro Series
Don't see your part number? Send us a photo of your old light and we'll confirm fitment before you order.
Engineered to outlast OE
The design decisions that separate our replacement lights from cheaper alternatives.
Perma-seal housing
UV-resistant polymer with sealed seams. No yellowing, cracking, or water intrusion.
Liquid-cooled electronics
Driver runs cool. Lower operating temperature means significantly longer LED life.
Soft diffuse lens
Even illumination across the whole pool. No glaring hot spot like OE lights produce.
High-efficiency LED chipset
Visibly brighter than the OE light. Full luminance across all 13 RGB color modes.
Tech specs and what's in the box
Everything you need to know before ordering.
No drain. No electrician. No drama.
Swap your old pool light in under 30 minutes with basic hand tools. No pool drain, no electrician, no special permits.
Remove the old light
Unscrew the old light from its niche and lift it out at the deck. Standard hand tools, no specialty equipment needed.
Disconnect at the junction box
Disconnect the cable at the junction box, then pull through your new light’s smooth-jacket cable. Glides through tight conduit without binding.
Connect and drop in
Connect the new light’s leads, thread it into the same niche, and tighten by hand. Power on and you’re done.
Common questions
The most common questions we get about this replacement light.
How do I know if this fits my pool light?
Match your existing light's manufacturer and original part number with the compatibility list on this page. If your model is listed, you have a drop-in fit. If it isn’t listed but you think it should be, send us a photo of your existing light and the model number from the bezel. We’ll confirm before you order.
Does this work with my existing pool light controller?
Yes. The light runs on standard 12VAC and works with any standard pool light controller. The 13 RGB color modes change with on/off power cycling, which every controller supports. Branded-controller program matching with Pentair, Hayward, and Jandy is coming in a future firmware update.
Do I need to drain my pool to install it?
No. The light installs the same way as the OE light. Pull the old one out at the deck, swap, and reinstall. No drain required. Most installs take under 30 minutes with basic hand tools.
What comes in the box?
The replacement light and a printed install guide. Unscrew your old light from its niche, disconnect at the junction box, and connect the new light’s leads to the same wiring.
How fast do you ship?
Shipping is free on every US order with no minimum. Please allow 7 to 15 business days for delivery.
What’s the warranty?
Two years against water intrusion and LED failure. If the light fails for either reason in that window, we replace it. Just keep your order email. No registration required.