LED Pool Light Replacement for Pentair IntelliBrite (Coming Soon)
LED Pool Light Replacement for Pentair IntelliBrite (Coming Soon)
✓ Free US shipping, ships same business day
✓ 2-year warranty against water intrusion and LED failure
✓ Fits or full refund. No restocking fee.
Our 10 inch large-niche LED replacement for the Pentair IntelliBrite is currently in development. The IntelliBrite (5G and Architectural Series) uses a large-format niche that requires different fixture geometry from our 1.5 inch nicheless products. We are engineering a direct drop-in replacement and expect to ship soon.
If you have a Pentair IntelliBrite, contact us at info@poollightsdirect.com or (239) 350-3110 to join the waitlist. We will reach out as soon as units are available.
In the meantime, our 1.5 inch nicheless drop-in is ready to ship for Pentair GloBrite and MicroBrite installations.
The 10 inch IntelliBrite replacement will be engineered with the same principles as our 1.5 inch line:
- Perma-seal housing engineered against the water intrusion that ends most pool lights
- High-efficiency LED chipset that runs cool for years of operation
- Liquid heat-transfer cooling for sustained brightness
- 13 RGB color modes for vivid, programmable lighting
- 2-year warranty against water intrusion and LED failure
Free US shipping
Ships same business day
Fitment guarantee
Fits or we refund
2-year warranty
Water intrusion + LED failure
US-based support
Real humans, not chatbots
Compatible with these OE pool lights
Match your existing light's manufacturer and original part number with the lists below. If yours isn't here, send us a photo and we'll confirm.
Pentair
MicroBrite, GloBrite, IntelliBrite
Hayward
ColorLogic 4.0, ColorLogic 320, Universal ColorLogic
Jandy
WaterColors, HydroCool, Pro Series
Don't see your part number? Send us a photo of your old light and we'll confirm fitment before you order.
Engineered to outlast OE
The design decisions that separate our replacement lights from cheaper alternatives.
Perma-seal housing
UV-resistant polymer with sealed seams. No yellowing, cracking, or water intrusion.
Liquid-cooled electronics
Driver runs cool. Lower operating temperature means significantly longer LED life.
Soft diffuse lens
Even illumination across the whole pool. No glaring hot spot like OE lights produce.
High-efficiency LED chipset
Visibly brighter than the OE light. Full luminance across all 13 RGB color modes.
Tech specs and what's in the box
Everything you need to know before ordering.
No drain. No electrician. No drama.
Swap your old pool light in under 30 minutes with basic hand tools. No pool drain, no electrician, no special permits.
Remove the old light
Unscrew the old light from its niche and lift it out at the deck. Standard hand tools, no specialty equipment needed.
Disconnect at the junction box
Disconnect the cable at the junction box, then pull through your new light’s smooth-jacket cable. Glides through tight conduit without binding.
Connect and drop in
Connect the new light’s leads, thread it into the same niche, and tighten by hand. Power on and you’re done.
Common questions
The most common questions we get about this replacement light.
How do I know if this fits my pool light?
Match your existing light's manufacturer and original part number with the compatibility list on this page. If your model is listed, you have a drop-in fit. If it isn’t listed but you think it should be, send us a photo of your existing light and the model number from the bezel. We’ll confirm before you order.
Does this work with my existing pool light controller?
Yes. The light runs on standard 12VAC and works with any standard pool light controller. The 13 RGB color modes change with on/off power cycling, which every controller supports. Branded-controller program matching with Pentair, Hayward, and Jandy is coming in a future firmware update.
Do I need to drain my pool to install it?
No. The light installs the same way as the OE light. Pull the old one out at the deck, swap, and reinstall. No drain required. Most installs take under 30 minutes with basic hand tools.
What comes in the box?
The replacement light and a printed install guide. Unscrew your old light from its niche, disconnect at the junction box, and connect the new light’s leads to the same wiring.
How fast does this ship?
Orders placed before 2pm ET ship the same business day. Most US customers see delivery in 2 to 4 business days via ground. Free shipping is included on every order.
What’s the warranty?
Two years against water intrusion and LED failure. If the light fails for either reason in that window, we replace it. Just keep your order email. No registration required.