A drop-in LED replacement for Jandy WaterColors and HydroCool pool and spa lights. It threads directly into the standard 1.5 inch nicheless fitting and runs on 12VAC, so it installs exactly like the original Jandy light. No pool drain required.

Between our two brightness levels and three cable lengths, there is a match across the WaterColors nicheless JLU4C series and the HydroCool lineup. If you would like white only, we can custom make those for you. Order on this page and choose the white option.

• Soft glow diffuser for even lighting with no hot spots
• Perma-seal resin filled housing engineered against the water intrusion that ends most pool lights early
• High-efficiency CREE LED chipset that runs cool for years of operation
• Liquid heat-transfer cooling for sustained brightness
• Rugged-jacket cable that pulls easily through tight conduit without binding or ripping
• 14 RGB Jandy Matched color modes for vivid, programmable lighting
• Compatible with Jandy Aqualink RS, upgraded TCX retrofit kits, and the Jandy WaterColors LED Light Controller. Not using automation? It works with a standard on/off switch as well.

30W High Brightness. Our 30W option delivers 50% higher light output than the 12W model, as measured in lab testing. The stainless steel housing acts as a heat sink for efficient thermal management, keeping LEDs cool under sustained operation for maximum longevity and consistent brightness. Choose this option if you have a single light and a large pool, or if just want the brightest, most vivid pool light on the market.

Covered by a 2-year warranty against water intrusion and LED failure. Free US shipping. Not sure about fitment? Text a photo of your light to (239) 350-3110 and we will confirm before you order. Are your lights in a bubbler tube? Verify the diameter of the lens as shown in the photos before ordering.

Replaces these Jandy part numbers. WaterColors nicheless with HydroCool, RGBW color (current): JLU4C6W50, JLU4C6W100, JLU4C6W150, JLU4C12W50, JLU4C12W100, JLU4C12W150, JLU4C24W50, JLU4C24W100, JLU4C24W150, plus the S, P, and H series versions of each (for example JLU4C12W100S, JLU4C12W100P, JLU4C12W100H). White only nicheless with HydroCool, daylight white 5000K: JLUW6W50, JLUW6W100, JLUW6W150, JLUW12W50, JLUW12W100, JLUW12W150, JLUW24W50, JLUW24W100, JLUW24W150. Warm white 2700K: JLUWW6W150, JLUWW12W150, JLUWW24W150. Nicheless LED Gen 2 RGBW WaterColors (previous generation): JLU4C9W50, JLU4C9W100, JLU4C9W150, JLU4C20W50, JLU4C20W100, JLU4C20W150, JLU4C30W50, JLU4C30W100, JLU4C30W150. Gen 2 white only: JLUW9W50, JLUW9W100, JLUW9W150, JLUW20W50, JLUW20W100, JLUW30W50, JLUW30W100, JLUW30W150. Mounts to a standard 1.5 inch return fitting. Compatible adapter: R1077100 (Jandy nicheless light adapter for GloBrite niche).